General specifications | |
---|---|
Signal type | Analog input |
Supply | |
Connection | Power Bus or terminals 1-, 2+ |
Rated voltage | 16.8 ... 31.2 V DC |
Power dissipation | 0.6 W |
Power consumption | 0.7 W |
Input | |
Connection side | field side |
Transmission range | linearity range: -1 ... 110 % |
Input I | |
Input II | |
Output | |
Connection side | control side |
Connection | terminals 3-, 4+ |
Ripple | ? 10 mV eff |
Transfer characteristics | |
Accuracy | max. 0.1 % of full-scale value |
Influence of ambient temperature | < 100 ppm/K of full-scale value |
Frequency range | 0 Или отправьте нам запрос на0 ... 5 kHz |
Settling time | 70 ms , 7 ms , 150 µs |
Indicators/settings | |
Control elements | DIP-switch |
Configuration | via DIP switches |
Labeling | space for labeling at the front |
Directive conformity | |
Electromagnetic compatibility | |
Conformity | |
Degree of protection | IEC 60529:2001 |
Ambient conditions | |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Damaging gas | designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications | |
Degree of protection | IP20 |
Connection | screw terminals |
Core cross-section | 0.5 ... 2.5 mm2 (20 ... 14 AWG) |
Mass | approx. 70 g |
Dimensions | 6.2 x 97 x 107 mm (0.24 x 3.82 x 4.21 inch) , housing type S1 |
Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
Data for application in connection with hazardous areas | |
Certificate | DEMKO 16 ATEX 1750X |
Directive conformity | |
International approvals | |
UL approval | E106378 |
IECEx approval | IECEx UL 16.0116X |
Accessories | |
Optional accessories | power feed module S1SD-2PF Power Bus POWERBUS-SETL5.*** Power Bus POWERBUS-SETH5.*** cover for DIN mounting rail POWERBUS-COV.250 end cap POWERBUS-CAP |
8 (029) 555-8-000 | |
8 (044) 555-8-000 |