Stationary read device OPC70P-F201-R2-45 - фото 1 - id-p95199184

Характеристики и описание

Описание оборудования
Optical Print Inspector, reads all common 1-D and 2-D codes, detects logos, Ethernet, RS232, speeds of up to 10m/s; polarization filter
General specifications
Polarization filter	yes
Symbologies	Data Matrix, Code 39, Code 128, Int 2 of 5, EAN13, Pharmacode
Read distance	45 ... 90 mm Nominal distance: 70 mm
Reading field	Minimum read field: 22mmx30mm Read field at nominal distance: 28mmx45mm Maximum read field: 35mmx55mm
Modul size	Minimum module size: 0.15 mm
Functional safety related parameters
MTTF_d	40.5 a
Mission Time (T_M)	8 a
Diagnostic Coverage (DC)	0 %
Electrical specifications
Operating voltage	24 V DC ± 15% , PELV
No-load supply current	max. 250 mA
Power consumption	6 W
Interface
Interface type	serial , RS 232
Transfer rate	max. 115.2 kBit/s
Cable length	max. 30 m
Interface 1
Interface type	Ethernet
Protocol	TCP/IP
Transfer rate	100 MBit/s
Input
Switching threshold	low: < 10V, high: > 15V
Cable length	max. 30 m
Output
Switching type	PNP
Cable length	max. 30 m
Compliance with standards and directives
Standard conformity
Approvals and certificates
UL approval	cULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure
CCC approval	CCC approval / marking not required for products rated ?36 V
Approvals	CE
Ambient conditions
Ambient temperature	0 ... 45 °C (32 ... 113 °F)
Storage temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP67
Connection	8-pin, M12x1 connector, standard (supply+IO) , 5-pin, M12x1 socket, standard (RS 232) , 4-pin, M12x1 socket, standard (LAN)
Material
Installation	4 x M6 threading
Mass	approx. 160 g