Описание оборудования | |
---|---|
WCS parallel interface module | |
General specifications | |
Installation | DIN rail mounting |
Electrical specifications | |
Operating voltage | 24 V DC ± 20 % |
Power consumption | ? 2 W (without read heads) |
Interface 1 | |
Connection of | control system |
Interface type | Push-pull, parallel |
Transfer rate | max. 500 Updates/s |
Output stage | Push-pull (4 in 1) output |
Load current | max. 5 mA |
Data output format | Gray code |
Interface 2 | |
Connection of | Read head |
Connectable read heads | WCS-LS211 , WCS-LS111 |
Interface type | RS-485 |
Transmission method | half duplex |
Transfer rate | max. 187.5 kBit/s |
RS485 termination resistor | integrated |
Refresh cycle of read head | 1 ms |
Input | |
Control input | store input 2 inputs for reading head address |
Output | |
Output type | PNP |
Signal output | error condition |
Rated operating current | ? 15 mA |
Standard conformity | |
Emitted interference | EN 55011 |
Noise immunity | DINEN50082-2 |
Ambient conditions | |
Operating temperature | 0 ... 55 °C (32 ... 131 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Relative humidity | ? 80 % |
Mechanical specifications | |
Connection type | removable terminal block |
Housing width | 100 mm |
Housing height | 74 mm |
Degree of protection | IP20 |
Material | plastic |
Installation position | any position |
Mass | approx. 400 g |
8 (029) 555-8-000 | |
8 (044) 555-8-000 | |
8 (017) 255-8-000 |